hands1.JPG (8713 bytes) ezprintlogo.gif (5226 bytes)

How It Works

Screen.jpg (20400 bytes)  

4-wire resistive touch sensors are created by coating a flexible plastic (optical quality polyester) film and chemically hardened glass with a nearly invisible super-thin layer of metal. These two surfaces  are separated by extremely small transparent separator dots which act like insulating springs, maintaining an even distance between the two metallic coated layers.

A small electrical current of 4-6 volts DC at less than 60 milliampsMa) is passed through the metallic-coated layers. When
pressure is applied to the surface, the separator dots allow the two charged surfaces to make contact. The
resultant signal is then sent to our controller which determines the exact point of contact and registers the
"touch" as a mouse would register a "click".

Highest resolution of any touch technology (4096X4096)
ADA (Americans with Disabilities Act) and
IDEA (Individuals with Disabilities Education Act) compliant  (activated by pressure)
Unaffected by dust, dirt, water, light or sound (for POS, kiosk, restaurant & industry)
Software driven, no need to open your computer (emulates a mouse)
You only need calibrate the screen once during initial installation of software
Drivers and cables included.

For more in-depth information about our technology please go to www.ezscreen.com/features.html

Our Standard Features

home    contact     products   order    search site   applications 

1997-2004 ezscreen , div. of intech bearing inc., 4955 gulf freeway, houston, texas 77023
Toll-Free: 888-TOUCHEZ (888-868-2439), 713-926-1186, Fax: 713-926-3110