RxKiosk Graphics

 Kiosk with the Lexan housing locked

1) To begin, unlock the housing from the backplane

2) Open the hinged housing

 

3)  

Example: This particular graphic insert is actually a background sheet. Using the template as a guide, this is clear  5mil Grafix® Dura-Lar (acetate substitute)  cut out with an X-Acto® knife.

The sky design was spray painted onto the rear ( of the clear sheet. The graphics are window-clings printed on an ink-jet printer. The clings were then laid onto the front  (unpainted) side of the sheet. These are easily removed and/or re-positioned without adhesive.

This method allows you great flexibility. You can change messages, or parts of a message, without the expense of a reprint or new design.

To install,  roll the four flaps up and place it squarely within the housing from the rear. The elastic memory of the material allows it to spring out into the housing.

Secure it in position with cellophane tape.

Click here for the full-size RxKiosk v.32 & Rx181 (4.4"depth) template guide with dimensions (Acrobat file)

Click here for the full-size RxKiosk Rx150 (3.9"depth) template guide with dimensions (Acrobat file)

Click here for the full-size RxKiosk V4 (3.9"depth) template without dimensions (Acrobat file)

home      order now    

©2001-2008 ezscreen® div. of intech bearing inc., 4955 gulf freeway., houston, tx 77023
ph. Toll-Free 888-TouchEZ (888.868.2439), local/int'l.: 713.926.1186, fax: 713.926.3110